How To Move A Washing Machine: DIY Guide

Want to pack or move your belongings like professionals? Read our blog posts that will help you manage relocation process with ease.

How To Move A Washing Machine: DIY Guide

Jan 12, 2024

If your household move is just around the corner, you will have a lot of things to take care of before the moving day. Apart from finding out how to properly pack and relocate your large furniture pieces, one more primary concern is how to move heavy appliances like the washing machine. If you are not careful, you might injure yourself when moving the machine.

Moreover, not adhering to proper precautions can also damage the appliance. This is why a lot of people prefer hiring the best removalists Sydney to move such heavy and delicate stuff. However, it is still possible to move the machine using a tested DIY method. You just need to follow the right steps. Here is how to move a washing machine the DIY way. Apply these steps to successfully move this heavy appliance.

1. Read the Instruction Manual

The best removalists in Sydney recommend carefully reading the instruction manual before moving your washing machine. In fact, it is necessary for safely moving every appliance, including a refrigerator. It will help you learn if certain materials are required for moving or if specific components need to be secured or detached in a particular way. If you cannot locate the manual, you can also explore the online versions by looking for your washer’s brand and model number.

2. Deep Clean the Appliance

Preparing your washer at least two days before the moving day is ideal. Use this opportunity to deep clean your beloved appliance externally and internally to ensure it looks clean and ready for the new home. Simply run an empty load using warm water. If you have the option of a drum clean cycle on your appliance, then use it. Ensure you spin dry.

Leave the detergent compartment and door open to let it air dry completely for about 48 hours. It will ensure the appliance is dry from the inside out and will prevent unpleasant odours. This step is vital if you want to keep your washer in storage for an extended period. Remember to wipe down door seal’s inside to eliminate mould and detergent deposits.

Also, if you have not cleaned out or replaced your filter in some time, use this opportunity to do so. The filter gathers tissues, lint, coins, socks and other small pieces. So, it is important to keep it clean. You can locate it at the washer’s front.

3. Power off the Machine and Disconnect

You must power off the cold and hot water valves that the washer is connected to before moving. Few of the latest washing machine models are known to be only connected to the cold water valve.

  • Attentively and carefully detach the water supply hose from the appliance
  • Position it in a bucket or the sink to permit the water to drain out.
  • Next, take off the hose from the water valves.
  • Turn off the switch and disconnect the machine from the power outlet.
  • To keep it secure, tape the power cord nicely to the washer.
  • Take off the drain hose from the appliance.
  • Allow the water to drain out in a bucket or sink.
  • When all of it has been drained, take off the hose from the drain end.

Expert removalists Sydney also recommend positioning the drain hoses and water supply hoses inside the washer drum. This way, you can ensure that they do not get misplaced during the transit.

4. Safeguard the Drum

To safeguard the appliance’s suspension system from getting damaged, it is highly crucial to stabilise the machine’s drum and prevent it from too much motion during transit. For front-loading washers, you will be required to place transit bolts at the machine’s back, as that will help you stabilise the drum. The appliance will likely come with the bolts at the time of buying.

If you do not have them, check with the machine’s manufacturer to figure out what transit bolts are required. This way, you can buy them before the moving day. For top-loading machines, because they do not come with bolts, you will need to safeguard them differently. Just insert padding materials such as foam or cardboard between the case and the drum.

5. Protect the Washing Machine

It is fairly simple to protect your washer if you follow the right steps. Simply tape down any doors and latches and then wrap the appliance with about 3 to 4 furniture blankets. It will ensure that the item is properly padded and safeguarded from scratches and dings during transportation in the truck.

Use shrink wrap or tape to secure the blankets to the washing machine. Following this step will help you offer maximum protection and help the cheap removalists Sydney move the item swiftly.

6. Move the Appliance

When the washer is ready for the move, utilise a dolly equipment to move it. Secure the machine to the dolly using robust ropes or bungee cords. It is worth noting that the washer must be kept in an upright position during the entire moving process to stop the outer and inner tubs from bumping against each other.

If you place the machine on its side or back, then unnecessary issues like a damaged suspension and loose pads might occur. It can also knock the machine out of alignment. So, it is best to just keep it in an upright position. It is also recommended to explore insurance options.

Wrapping Up

Moving a large, heavy machine like a washer is definitely challenging. But it is certainly possible to do so by taking the safety measures. Follow the steps from this article to move your washing machine safely.